Proportional non electric pumps for liquids dosage.
Use of Tefen's proportional pumps as fertilizer injectors in agriculture.
It is commonly thought that TF injectors are proportional fertilizer injectors, mainly suitable for detached beds in hothouses or agricultural sections in which the method of fertilization used is quantities proportional to the irrigation flow rate. The aim of this article is to present injectors of the TF type.These are injectors that are not only proportional injectors.
They are used as fertilizer injectors that can achieve a injectoring flow rate of up to 1250 liter/hour, a very high flow rate for injectors of this kind. They operate with minimum pressure losses of up to 1.5 bar, if a TF 25 5% injector is used at maximum flow rate. The flow rate of the injectors against low pressure losses can be seen in the following diagrams. Injectors of the TF type are suitable for sections in which importance is attached to large quantities of fertilizer during irrigation or in places in which the irrigation times are limited and the quantities of water and fertilizer are large, up to a flow rate of 1250 liter/hour.
Proportional fertilization in an organic  application.
The majority of organic fertilizer is delivered in powder form. In order to inject the fertilizer into the irrigation system, it has to be diluted in water. For this reason it is difficult if not impossible to arrive at a high density of fertilizer within the injection tanks. The MixRite injectors are capable of injecting fertilizer at levels of up to 5% of the total quantity of water in the tank, a feature which allows the TF-25 to be especially suitable in the handling of organic fertilizers.The advantages of the MixRite TF-25 injector: Based on a stand alone design that does not require constant attention. Simple to set, and exact to a scale of up to 25 grams per cubic meter. MixRite injectors do not require batteries or electric power to operate them. Opposed to other pumps available on the market, the TF-25 does not release water during its operation. This advantage prevents a build up of unwanted mud around the irrigation head, and prevents unwelcome mosquitoes and flies. Provide consistent service for months and even years




More
More
Русский
English


Desctiption BSP Additive Flow Rate Cat #
MixRite TF5, 0.1%-1%,1" BSP 1" 0.1%-1% 5000  L/hour  MAX 28040100000
MixRite TF5, 0.2%-2.0%,1" BSP 1" 0.2% -2% 5000  L/hour  MAX 28040200000
MixRite TF5, 1%-5%,1" BSP 1" 0.5%-5% 5000  L/hour  MAX 28040500000
MixRite 5.0 0.1-1% ON/OFF 1" BSP 1" 0.1%-1% 5000  L/hour  MAX 28040110000
1" 0.2% -2% 5000  L/hour  MAX 28040210000
1" 0.5%-5% 5000  L/hour  MAX 28040510000
MixRite 5.0 0.1-1% E 1" BSP 1" 0.1%-1% 5000  L/hour  MAX 280401E0000
1" 0.2% -2% 5000  L/hour  MAX 280402E0000
1" 0.5%-5% 5000  L/hour  MAX 280405E0000
Desctiption NPT Additive Flow Rate Cat #
MixRite TF5, 0.1%-1%, 1", NPT 1" 0.1%-1% 5000  L/hour  MAX 28030100000
MixRite TF5, 0.2%-2.0%, 1" NPT 1" 0.2% -2% 5000  L/hour  MAX 28030200000
MixRite TF5, 1%-5%, 1" NPT 1" 0.5%-5% 5000  L/hour  MAX 28030500000
MixRite 5.0 0.1-1% ON/OFF 1" NPT 1" 0.1%-1% 5000  L/hour  MAX 28030110000
1" 0.2% -2% 5000  L/hour  MAX 28030210000
1" 0.5%-5% 5000  L/hour  MAX 28030510000
MixRite 5.0 0.1-1% E 1" NPT 1" 0.1%-1% 5000  L/hour  MAX 280301E0000
1" 0.2% -2% 5000  L/hour  MAX 280302E0000
1" 0.5%-5% 5000  L/hour  MAX 280305E0000
Desctiption 32mm Additive Flow Rate Cat #
MixRite 5.0, 0.1-1% ,32 mm 32 mm 0.1%-1% 5000  L/hour  MAX 28050100000
MixRite TF5, 0.2%-2.0%, 32 mm 32 mm 0.2% -2% 5000  L/hour  MAX 28050200000
MixRite TF5, 1%-5%, 32 mm 32 mm 0.5%-5% 5000  L/hour  MAX 28050500000
MixRite 5.0, 0.1-1%, ON/OFF,32 mm 32 mm 0.1%-1% 5000  L/hour  MAX 28050110000
32 mm 0.2% -2% 5000  L/hour  MAX 28050210000
32 mm 0.5%-5% 5000  L/hour  MAX 28050510000